Categories

Change the Com-Port of the decoder in the system

You are here:
< All Topics

Introduction

This tutorial explains to you how to change the ComPort of the decoder in the system.

You need to know first what is the right com port of the decoder, to know that, go to “device manager” in windows (shortcut if you can not find it: Press Windows+X to open the menu, and choose Device Manager on it)


then, follow the next steps:

Configuration

  1. Open the ‘Menu’ in the top right corner of the application
  2. Go to ‘system’ -> “devices
  3. Look for the computer where the decoder is connected.
  4. On the “port” field, type the number of the com port.
  5. Click on save.
Table of Contents